HDD Regenerator and other similar software, its mechanics and capabilities are often misunderstood, probably due to lack of understanding of the concept of how the software works and what exactly it does. Some think that there are software products that work much faster than HDD Regenerator. Even if there were such a thing, keep in mind that the level of testing and the results would be completely different. Same image with HDD format: When a quick format is executed, the disk is not actually being formatted.
Quick format just means rebuilding the file table. The actual formatting is a process of magnetizing all groups to 1. Therefore faster does not mean more effective. HDD Regenerator also has a quick scan option, but you may actually end up making the situation worse to save time. People who work with sensitive information should, in fact, take advantage of HDD Regenerator and run it periodically instead of waiting for HDD to fail.
Some think that HDD Regenerator marks bad sectors as good, reads the data and writes it back, and if the write fails, it’s a totally bad sector. That’s not true; what actually happens is that HDD Regenerator strengthens the magnetic surface of HDD by repeatedly reading and writing. But of course, if it is not possible to write in a certain magnetic field, the sector cannot be repaired. There are many other misleading rumors and analyzes like this.
The concept of repairing a damaged hard drive, using just one software product, is a bit confusing to some people. Just remember that HDD Regenerator can repair magnetic damage, which is the cause of 80% of all HDD failures. Here is the good example of how to try HDD Regenerator. Let’s say you have HDD with several bad blocks; if the hard drive has never been formatted before or if you are changing the file system, you should run a low-level format. If it fails due to bad sectors, it means the hard drive was bad, but if the scan succeeds without finding bad sectors, run HDD Regenerator and you can be sure that the bad blocks will be gone.
Defects in the magnetic layer of hard drives can be due to something as simple as the microscopic size of dust. Actually, there is no point in taking any action if the hard drive has only one bad sector. I don’t know how many billions. Modern hard drives are designed with many spare sectors. and hard drives are smart enough to take action without us noticing.
The location of the bad sector is known to the hard drive mechanic and controller and is already remapped. HDD will never touch the same sector as poking around could make things worse. The thing is that many brands also have a diagnostic tool for their own brand HDD. which can upgrade the magnetic surface on the HDD disk. There have been many cases where the HDD diagnostic tool failed to fix or even diagnose a problem and the hard drives were giving I/O errors and even refusing to show up on the system.
